Making Additional Routes; Creating A Route Using Marks On The Chart Page - Standard Horizon CP300i Owner's Manual

6. Then move the ShuttlePoint knob to the last Waypoint. On the CP180/CP180i press
[ENT].
7. On the CP180/CP180i move the ShuttlePoint knob to highlight OLYMPIC and press
[ENT]. On the CP300/CP300i press [O
last Waypoint.
9.3

MAKING ADDITIONAL ROUTES

To create another Route the GPS Chart Plotter must be told that you want to create a second
Route.
1. Press [MENU], move the ShuttlePoint knob to highlight USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight ROUTE and press [ENT].
3. Move the ShuttlePoint knob to highlight SELECT and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to an open Route number example Route 2.
5. Press [ENT] or move the ShuttlePoint knob to the right.
6. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.
7. To create the new Route, follow the steps in Creating a Route using Waypoints or Marks
sections.
9.4

CREATING A ROUTE USING MARKS ON THE CHART PAGE

To create a Route containing Marks you first must create the Marks and show them on the
Chart page.
1. Move the ShuttlePoint knob over the top of a Mark that you wish to be the starting point
in the Route and press [ROUTE].
2. Next move the ShuttlePoint knob until the cursor is over the Mark that you want to be
the next leg in the Route.
3. Press [ROUTE]. You will notice a bearing line joins the first and second Mark which
means these Marks are selected into the Route.
4. Repeat steps 3 and 4 until all Marks are entered into the Route.
At this point the Route is saved as ROUTE01. If you would like to save the Route under a specific
name follow the remaining steps.
5. To name the Route press [MENU]. Move the ShuttlePoint knob to highlight USER
POINTS and press [ENT].
6. Move the ShuttlePoint knob to highlight ROUTE and press [ENT].
GPS Chart Plotters
]. A line joins the starting Waypoint and the
LYMPIC
Figure 9.2a - Olympic Route creation (2)
NOTE
Page 69