Creating Marks; Creating A New Mark On The Chart Page; Editing A Mark Or Waypoint - Standard Horizon CPN700i Owner's Manual

Note that on the Full Info, a small camera icon is shown. To see the picture tap on the
Soft Key when the object with a picture is highlighted. When the picture is shown,
tapping on it shows the associated Soft Keys. If there are more pictures to show, there will
be and/or
tap on and the Soft Keys will disappear.

2.6 CREATING MARKS

A User Point is an object that you can place on the charts to mark a specific point. The CPN
Series Chart Plotter features two types of User Points: Marks and Waypoints.
· A Mark can be a standalone position or be linked to a Route. A Mark is placed on the
Chart page using the
page and tapping on
· Waypoints are always linked to a Route. They are placed on the Chart page using the
key.
The difference between a Mark and a Waypoint is:
a. when a Route is created using Waypoints and the Route is deleted the Waypoints are also
deleted.
b. if a Route is created using Marks and the Route is deleted the Marks remain.
2.6.1

CREATING A NEW MARK ON THE CHART PAGE

1. Move the ShuttlePoint knob or tap the screen at the desired or approx. Lat/Lon and
press the
2. You will notice a Mark is placed under the location of the cursor and a popup window
is shown with the exact Lat/Lon of the Mark.
3. If the position is incorrect, tap on the
position, Mark name and icon type by tapping on the position, Mark name or icon.
After entering in all the Marks it is a good practice to backup the points to a SD CARD.
2.6.2

EDITING A MARK OR WAYPOINT

1. Tap on the Mark or Waypoint you want to edit.
CPN700i and CPN1010i Multimedia Chart Plotters
Soft Keys. Tap on the
key or by entering information in the Marks/Waypoints List
.
key.
Soft Key to exit, otherwise
Soft Key which allows changing of the
Page 61