Duplex Pick-Up Solenoid Adjustment - Ricoh FT5540 Service Manual

31 August 1989

6.7 Duplex Pick-up Solenoid Adjustment

1. Remove the jogger unit. (Refer to "Jogger Unit Removal.")
2. Loosen the two screws to shift the duplex pick-up solenoid bracket [A] fully to the left (rear
view).
3. Insert a 1.5 mm thickness gauge [B] between the plunger and the solenoid. Then, push
the plunger to the right.
4. While rotating the duplex pick-up roller [C], shift the duplex pick-up solenoid bracket to the
right until the roller can not be rotated. Then, secure the duplex pick-up solenoid bracket.
5-46