Ricoh FT5540 Service Manual page 177

31 August 1989
12. Reinstall the fusing unit.
13. Remove the image density sensor cover [A].
14. Pull down the toner bottle holder [B], lower the transport unit [C], and remove the drum
inner cover [D] (1 screw).
15. Put a sheet of paper [E] on the T/S corona unit [F].
16. Remove the charge corona unit [G] (2 connectors), and remove the drum stay [H]
(1 brass screw, reverse-thread knob).
17. Place a sheet of paper on the floor. Raise the development unit lock lever [I], remove the
development unit, and place it on the paper.
3-10