Return Pinch Roller Solenoid Adjustment - Ricoh FT7770 Service Manual

2. Return Pinch Roller Solenoid Adjustment

ADJUSTMENT STANDARD: 1.5 ±
Pull the fusing unit all the way
1.
[A] (2 screws).
Slowly push in the plunger [B] of the return pinch roller solenoid until
2.
the return pinch roller [C] touches the return drive roller [D].
At this position, measure the rest of the stroke [E]. If the gap is not
3.
within specifications, adjust it by moving the inverter gate solenoid
[F] (2 screws).
1.0 mm (Plunger at energized position)
out and remove the inverter unit cover
5-55
30
April, '89