Pick-Up Roller Solenoid - Ricoh BR-C1a Basic Service Training

 When you re-install the pick-up roller solenoid, make sure that the
arm of the solenoid (1) is on the arm of the pick-up roller shaft (2).
 Depress the pickup roller and make sure that it bounces up and
down.
 If the actuator of the solenoid is not positioned correctly, the
pick-up roller will catch on the frame and jam the right tandem
tray when the PFU is re-installed.
Slide 329
No additional notes
Replacement and Adjustment

Pick-up Roller Solenoid

329
BR-C1 Training