Installation Procedure - Ricoh FT5540 Service Manual

31 August 1989

6.2 Installation Procedure

NOTE: The LCT can only be installed with the system table or the cassette bank.
1. Remove the three strips of tape [A].
2. Open the side cover [B] and remove two strips of tape [C] on the top cover.
3. Open the top cover [D] and remove the strip of tape [E] securing the stopper bar [F].
4. Turn off the main switch of the copier and unplug the power supply cord.
5. Remove the first and the second cassettes from the copier.
10-11