Ricoh FT5540 Service Manual page 199

31 August 1989
Mode No.
Weekly Timer Set:
81
Programs machine to turn on/off each day of the
week.
82 Automatic Shutoff:
Selects automatic shutoff time.
85 EM Call Phone Number:
Sets phone # of service representative.
PM Counter:
86
Turns on PM counter.
87 PM Copy Count:
Sets PM counter interval.
PM Counter Check:
88
Displays contents of PM counter.
89 PM Counter Reset:
Resets PM counter
90 User Code Mode:
Selects user code mode. (Key counter shorting
connector must be removed.)
91 User Code Counter Check:
Displays contents of each user counter.
92 User Code Counter Reset:
Resets user's counters. Use + and - keys to
select the user code. To reset press "1", then #.
Maximum Copy Quantity:
93
Sets maximum enterable copy quantity.
97
Clear S/C & Jam count:
Clears service call and jam counters.
Function
4-14
Data
C o m m e n t s
Also accessible by customer
through keyboard.
0: No (Factory setting = 0)
1: 30 min
2: 1 hour
3: 3 hours
Use decimal key for a space.
0: No (Factory setting = 0)
1: Yes
0: 80 k (Factory setting = 0)
1: 60 k
2: 100 k
When the PM count is
exceeded, the Service Call
indicator blinks.
0: No Use after performing PM.
1: Yes
0: No If ON, a code must be entered
1: Yes to copy. See user code table.
Reset after 60 sec. or if C/S
and Clear modes pressed
together. Accessible through
key board. (Factory setting =
0)
User counters count from 0 to
99999. Accessible through
keyboard.
0: No Accessible through keyboard.
1: Yes
The indicator blinks and the
max. quantity is displayed. lf
"0" is entered, max. is 999.
Otherwise, max. is number
entered. (Factory setting = 0)
0: No DIP SW 801-7 must be on.
1: Yes (Factory setting = 0)