Ricoh FT5540 Service Manual page 306

31 August 1989
6. Remove the knob [H] from the relay roller drive assembly (1 screw). Remove the support
straps [I] (1 screws each), the copier front cover (2 knob screws).
7. Remove the right inner cover [J] (4 screws), and install the relay roller drive assembly [K]
(2 screws).
8. Reinstall the right inner cover and the knob.
9. Check the operation of the cassette bank and the copier system.
10. Fill out the New Equipment Condition Report.
7-13