Tc/Sc Cleaner Drive Wire Replacement - Ricoh FT5540 Service Manual

31 August 1989

8.5 TC/SC Cleaner Drive Wire Replacement

1. Remove the TC/SC wires. (Refer to "Transfer and Separation Corona Wire Replacement.")
2. Remove the rear endblock [A] (1 screw) while holding it firmly, since it may spring away.
Then, remove the drive pulley [B].
3. Remove the drive gear [C] and the pulley [D] from the front side. Then, replace the drive
wire [E].
NOTE: Make sure that the spring that acts upon the home position sensor actuator is seated
correctly.
5-64