Ricoh FT5540 Service Manual page 259

31 August 1989
4. Turn over the jogger unit, and place the eyelet [F] (the one furthest from the ball) on the
anchor pin [G]. Then, route the wire as follows:
(1) Wrap the wire counterclockwise around the lower track of WP1 [H].
(2) Wrap the wire counterclockwise, from lower to upper, around the jogger motor
pulley [I].
5. Connect both ends of the wire with the spring [J].
6. Iadjust the jogger home position. (Refer to the adjustment table.)
5-48