Side Registration Adjustment - Ricoh FT5540 Service Manual

7.5 Side Registration Adjustment

ADJUSTMENT STANDARD:
The pinion bracket [C] has 8 mm of play for side registration adjustment.
If the image is shifted to the front [D], move the pinion bracket in the direction of arrow [E]: if
the image is shifted to the rear [F], move the pinion in the direction of arrow [G].
1. Rotate the paper size dial to A4. Do not move the paper size dial again while performing
this adjustment.
2. Raise the tray bottom plate [A].
3. Turn off the main switch.
4. Remove the front inner cover [B] (2 screws).
A = 297 to 299.5 mm
B = 14.0 ± 1 mm
10-23
31 August 1989