31 August 1989
7. Hook one end of the wire [A] on the anchor [B] using the ring [C].
8. Route the scanner wire in the following order:
(1) Outer track counterclockwise.
(2) Below securing screws.
(3) Lower track counterclockwise.
(4) Lower track clockwise.
(5) From lower to upper 5.5 times counterclockwise.
(6) Lower track counterclockwise.
(7) Inner track counterclockwise.
(8) Inner track clockwise.
(9) Hook the wire to the anchor with the spring [D] and the ring [E].
5-6