Ricoh FT5540 Service Manual page 194

< SP-98 "Clears all counters" >
Service program SP-98 clears all copy counters, self-diagnostic counters and jam counters.
The procedure for using this function is the same as with SP-97, only this time select SP-98.
The following will be cleared:
1) SP-100 through SP-139
2) SP-85 (E.M. telephone number)
3) SP-86 through SP-89 (PM counter)
4) All user programs
5) Secret Mode counters 1-20
< SP-99 "Clear all memory" >
This service program clears all the service programs described above as well as all adjust-
ments and modes. All modes default to factory settings.
1. Turn the main switch off.
2. Turn on DIP SW 801-7 and 8 on the operation board.
3. Turn on DIP SW 100-8 on the main board.
4. Turn the main switch on.
5. Select SP-99 and press the "1" key on the key pad. Then, press the Enter key to clear the
memory.
6. Turn the main switch and the DIP switches off. Then, turn the main on to resume copier
operation.
4-9
31 August 1989