Service Program Mode Table - Ricoh FT5540 Service Manual

31 August 1989

3.4 Service Program Mode Table

Mode No.
Exposure Lamp OFF Free Run:
5
Free run with exposure lamp OFF
6 Jam Detection OFF:
Copies are made without jam detection.
7
Corona Wire Cleaner Function:
Operates CC/SC cleaner motors.
8 Input Check:
Displays sensor input.
10 Drum conditioning:
Conditions a new drum.
11 All Indicators ON:
Turns on all operation panel indicators.
12
Language (LT version only):
Selects language. (French or English)
13 Language (A4 version only):
Selects language. (Japanese, English, French,
German, Italian and Spanish)
15 Auto Reset Time:
Selects 1 or 3 minute auto reset.
16
Count Up/Down:
Selects count up or count down.
17 Auto Cassette Shift:
Selects autocassette shift mode.
18 Beeper:
Turns beeper ON or OFF.
Auto ID Priority:
19
Selects the priority of image density control when 1: Man.
the main switch is turned on.
20 Feed Station Priority:
Selects feed station priority at power on.
Function
4-10
Data
Comments
"No" is displayed when 0 is
selected.
Motor starts when Enter key is
pressed. Stops after 1 cycle.
For data, see the input check
table.
100 will appear in the copy
counter. Press Start to
activate.
0: E DIP SW 801-3,4,5 must be set.
1: F
See DIP SW tables. (Factory
setting = 0: E)
DIP SW 801-3,4,5 must be set.
0: J
1: E See DIP SW tables.
2: F
3: G
4: I
5: S
0: 1 min (Factory setting = 0)
1: 3 min
2: none
0: UP
1: DOWN
0: YES Copier automatically shifts to
1: NO
another cassette holding
same size paper when paper
runs out. (Factory setting = 0)
(Factory setting = 0)
0: YES
1: NO
0: ADS (Factory setting = 0)
0: 1st (Factory setting = 0)
1: 2nd
(LCT)