Ricoh FT5540 Service Manual page 372

31 August 1989
6. Remove the rear cover [A] (2 screws), and remove the toner collection bottle [B].
7. Remove the handle [C] on the bottom right side of the copier (2 stud screws), then remove
the second cassette lift arm [D] (2 screws).
NOTE: Save this handle for later use (when transporting the copier).
8. Insert the tray into the second cassette position.
NOTE: Make sure that the rib [E] fits into the groove [F].
9. Open the side and top covers and secure the tray with two bolts [G]. Use the longer bolt for
the rear side and the shorter bolt for the front side.
10-12