Blade Cleaner And Bias Roller Blade Replacement - Ricoh FT5540 Service Manual

3.3 Blade Cleaner and Bias Roller Blade Replacement

- Blade Cleaner -
1. Remove the blade assembly [A] (2 screws, 1 spring).
2. Remove the old blade cleaner [B] (1 screw).
3. Install the new blade cleaner. Make sure that the springs [C] are set properly.
- Bias Roller Blade -
1. Remove the old bias roller blade [D] (2 screws).
2. Install the new bias roller blade.
CAUTION: When reassembling, make sure the bias roller blade [E] is inserted under
the bias roller [F].
5-23
31 August 1989