Bin Drive Motor Replacement - Ricoh FT5540 Service Manual

8.2 Bin Drive Motor Replacement

1. Remove the drive belt. (See the preceding procedure.)
2. Disconnect the 3p connector [A] from the sorter control board.
3. Remove the helical wheel cover [B] (1 screw).
4. Disconnect the 2p connectors [C] from the motor capacitor [D] and the connectors [E]
from the overrun switch [F].
5. Remove the cable tie [G].
6. Loosen the 4 mounting screws [H] of the bin drive motor [I].
7. Remove the bin drive motor.
9-17
31 August 1989