Step
Procedure
2
Select the link for the log name you want to view or configure (the default
choices are log1 or log2). See the previous page.
3
Enter a new log name in the textbox.
4
Click on the Submit button to save this change.
5
Log in as a root User if you are so prompted. (Note: Any change of a
setting will only be accepted after you have successfully logged in.)
Selecting the Log Type
Step
Procedure
Select the System Log link. See the next page.
1
2
Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide
(Rev.1.1)
L001411
32