2.5 Installing the print ribbon
Important: Do not connect the power supply or communication cable (USB or Ethernet) at this stage.
FARGO High Definition printers require highly specialized supplies to function properly. This printer uses a
refillable ribbon drawer. To maximize the printer durability, reliability and printed card quality, you must use
only FARGO-certified supplies. If not using FARGO-certified supplies, your FARGO warranty is void, where
not prohibited by law.
Each print ribbon includes a replaceable cleaning roller. The recommended cleaning cycle is after every 2,000
cards printed.
1. Open the printer front cover.
2. Slide out the ribbon drawer by pulling on the gray handle.
24
Setup and installation
PLT-02931, Rev. A.0
September 2018