3.2 Device Options Tab
Use the Device Options tab to set print options.
Field
Supplies
Dual Sided
May 2017
Printing Preferences
Definition
Automatically detect the installed Ribbon for every print job: Use this option to verify that
the ribbon type selected matches the installed ribbon. The printer changes the Ribbon Type to
the correct setting.
Ribbon Type: Use this option to manually select the ribbon type. Note: The Automatically
detect the installed Ribbon for every print job option must be unselected for this option to be
active.
Select from the available ribbon types on the drop-down list.
Print Both Sides: Prints on the front and back sides of the card.
• Split 1 Set of Ribbon Panels: Prints on the front and back sides of the card using a set of
panels.
• Print Back Image on Front of Card: Prints the first page of a two-page print file on the
card's backside. This option can also be used to print black resin on a smart card's chip
side. Note: The second page of the file is printed on the card's front side.
Print Back Side Only: Prints only on the card back side.
Page 3-3
PLT-02496, Version: 1.2