Device Options Tab - HID FARGO HDP5000 User Manual

Page 3-7
3.2

Device Options Tab

Use the Device Options tab to set the printing options.
Field
Supplies
February 2016
Description
Automatically detect the installed Ribbon and Film for every print job
This option will auto detect the consumables, which are the ribbon and film.
Ribbon Type: Allows the selection of the ribbon type that is loaded in the printer.
• YMC-Full Color
• YMCK - Full Color/Resin Black
• YMCKK - Full Color/2 Resin Black
• YMCKH - Full Color/Resin Black/Heat Seal
• K-Premium Resin
• YMCFK - Full Color/UV Fluorescing/Resin Black
• YMCKI - Full Color/Resin Black Inhibit
• YMCK - Full Color/Resin Black-Half Panel
• YMCKK - Full Color/2 Resin Black-Half Panel
• YMCKIKI - Full Color/2 Resin Black/2 Inhibit
• YMCIKH - Full Color/Inhibit/Resin Black/Heat Seal
Film Type: Allows selection of film type for the film currently loaded in the printer.
• Clear: Automatically adjusts the transfer time and temperature to pre-determined defaults
on non-custom card type selected on Card tab.
• Holographic: Modifies the internal printer settings needed to make the holographic film
work on non-custom Card Type s. Note: It will adjust the Transfer Temperature and the
Dwell settings in the driver to provide the optimal holographic InTM performance.
• High Durable Clear: Adjusts the Transfer Time and Temperature to pre-determined
defaults on non-custom Card Type chosen on Card tab.
Printer Driver Operations
L000950, Version: 4.0