Chapter 3. System Features
Setting up the Network BLF Display system includes configuring a Server PC, Client PCs
and Browser PCs to work with networked DBS 576/DBS 576HD systems. An API card
and Network BLF-specific programming is required. For detailed installation and setup
instructions, see Section 565 - Network BLF Display System Administrator Manual.
Hardware Requirements
•
See Section 565 - Network BLF Display System Administrator Manual.
Related Programming
•
See Section 565 - Network BLF Display System Administrator Manual.
Considerations
•
See Section 565 - Network BLF Display System Administrator Manual.
Network Facilities
Description
The System supports
•
Network Attendant Reversion
•
Network Call Forward
•
Network Call Routing
•
Network Call Transfer
•
Network Caller ID
•
Network Camp On / Call Waiting
•
Network Centralized Attendant
•
Network Centralized Voice Mail
•
Networking Extension Calling
•
Network Flash Transfer
•
Network Hold
•
Network Hold Recall
•
Network Paging
•
Network Transfer Recall
•
Tandem Calling
Feature availability depends on CPC version and system configuration/programming.
information on System Networking, see the System Networking Reference Manual.
For more information about QSIG, see "QSIG ISDN Lines" on page 3-51.
Network Attendant Reversion
Network Attendant Reversion enables calls to revert to the attendant in the same cabinet. Calls will
not revert if the cabinet receiving the call has no attendant. Network Attendant Reversion does not
work with Network Hold.
3-46
T1 and QSIG
networking facilities such as:
DBS 576 (USA) issued September 2001
Section 700 - Operation
For more
576-50-700