Part Names And Functions; Front - MUTOH spitfire 90 Maintenance Manual

2.3. PART NAMES AND FUNCTIONS

Part names and functions are explained below.

2.3.1. Front

No. Name
1 Operation panel
2 Ink compartment
3 Front cover
4 Pressure rollers
Maintenance cover
5
6 Stand
Function
This panel is used to set operational conditions, the status of the printer and
other functions.
This is the place for installing ink cassettes.
This cover keeps the operator safe from the drive parts of the printer while it is
operating. Only open and/or close the cover to perform following operations:
Media setting and replacement
Cutter blade replacement
Cleaning the cleaning wiper
In case of media jam.
This roller is used to press the media from above and keep it flat when printing.
This protects users from electric shocks caused by touching the internal
electrical parts. The cover is opened when expansion memory (optional) has to
be installed, and is closed for normal use.
This stand is used to install the printer on a surface flat floor.
The unit is delivered with a Unwinder / Winder 100 system
24
Spitfire – Maintenance Manual
AP-74096, Rev. 1.0, 09/06/05