Part Names And Functions; Front - MUTOH Toucan Hybrid PJ-162-FE User Manual

2.3 PART NAMES AND FUNCTIONS

Part names and functions are explained below.

2.3.1 Front

N° Name
1 Operation panel
2 Main tank
3 Tank tray
4 Pressurizing roller
5 Platen
6 Media guide
7 Foot switch
8 Valve cover
Function
This panel is used to set operational conditions, the status of the printer, and
other functions.
Container for holding the ink and the jetwash fluid.
Used to attach the main tanks to the product.
This roller is used to press the media from above and keep it flat when
printing.
There is an ink drying device (up to 45°C) built in. On the surface, there is a
cutter groove for paper cutting.
This is used to feed the media smoothly when setting the media and when
printing. Used for drying (up to 70°C)
This switch is used to raise and lower the pressure roller.
This is a cover to protect the user from the internal components of the
product. It is opened when cleaning the print head or the sub-tank, and is
normally closed.
28
User's Guide – Toucan Hybrid
AP-750, Rev. 1.1 –- 23/04/04