4 Handling the printer
Setup items
media detect
TIP
•
When setting "Take-up Mechanism" on the Media Detection menu, the following limits are applied to the
operation of the product.
•For initial media, only the media width is detected.
•Under normal conditions, media cannot be sent backward.
•The media cannot be moved forward or backward from the Origin Setting menu.
•The settings in the Media Cut menu are disabled, and the settings are changed to "Off". (
menu)
4.4.62 Power on cleaning menu
Set whether cleaning should be performed automatically when the power is turned on.
Setup items
Power on cleaning
4.4.63 Media width menu
When media detection will not be performed during initialization of the media, the width of the media
set is set here.
Parameters
<Normal>
OFF
Take-up mechanism
-
Parameters
<Off>
On
-
Rockhopper II - User's Guide
Descriptions
Perform media detection automatically.
No media detection.
Make this setting when using the optional take-up mechanism.
•[CANCEL] key: shift to the previous hierarchy menu.
4.4.59 Utility menu
Descriptions
Power on cleaning is not performed.
Power on cleaning is performed.
After setting, shift to the previous hierarchy menu.
4.4.59 Utility menu
4-43
4.4.21 Media cut