Media Set Menu; Media Width Menu - MUTOH Valuevet VJ-1638 Operation Manual

5 Panel setup menu
5.1.4

Media Set menu

Sets whether to detect the media width and edge while initializing the media.
NOTE
• When Media Detection menu is set to "Off", set the media width of the current media in Media
Width menu.

5.1.5 Media Width menu

• When the the media detection is set to "Off", the media cannot be cut automatically.
Setup item
Init.
5.1.5 Media Width menu
Specifies the media width between the loading mark and the left end of the media if media detection is
not performed during media initialization.
(1) Media Width menu
Displays the detected media width if media detection is performed during media initialization.
(2) MediaWidth menu
Setting
Off
Top&Width
<Width>
—
VJ-1638/1638W OPERATION MANUAL
Description
The media will not be detected.
Detect the media width and edge while initializing the media.
Detect the media width while initializing the media.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
5-20