Error Display Menu; Media Width Menu - MUTOH Toucan Hybrid PJ-162-FE User Manual

5.5.34 Error Display menu

Set display method to the operation panel when mirror error occurred
Setup Items Parameters
Error Disp. <OFF>
ON
.

5.5.36 Media width menu

Media tray is detected and set to origin point. Set your media according to the alignment lines.
Notes:
• If the set value is larger than the media width set by the media width menu, media and
platen heater (for roll-to-roll mode) or media tray (for flatbed mode) may be tainted by
ink during printing.
Setup Items Parameters
Paper width 210mm to <841mm> to
1525 mm
* ErrorDisp *
F1 →
OFF
- OFF -
* PaperWidth *
210 mm – 1626 mm
F23, F4
ON
(1/1)
Descriptions
No Error Display
Perform Error Display
After setting, shift to the previous hierarchy menu.
→ Utility menu
+
841 mm -
→ENTER
Descriptions
Change media width by operating the following keys.
• [F2] key: Increase setup value.
• [F4] key: Decrease setup value.
• [ENTER] key: Confirm setup value, shift to the previous
hierarchy menu.
• [CANCEL] key: Cancel setup value, shift to the previous
hierarchy menu.
→ Utility menu
179
User's Guide – Toucan Hybrid
← F2
← F2
← F4
AP-750, Rev. 1.1 –- 23/04/04