Media Width Menu - MUTOH VJ-2638 Operation Manual

VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
5.1.5

Media Width menu

Specifies the media width between the loading mark and the left end of the media if media detection is
not performed during media initialization.
(1) Media Width menu
Displays the detected media width if media detection is performed during media initialization.
(2) Media Width display menu
For media detection settings, refer to the following.
5.1.4 Media Set menu
No.
1
2
3
4
NOTE
• When the media is loaded as shown in the illustration and not using media detection, the printer
may print on between the right edge of Platen and center of the media. If this happens, adjust the
print starting position in Origin menu.
5.1.7.1 Cut Pressure menu
5.1 Setup menu
1
Roll media
Media width (when not using media detection)
Media loading mark
Platen
2 2 2
Name
Panel setup menu
3 4
253