Mmc: 615 Mgi Group - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 615
DESCRIPTION:
This optional program sets designated MGI ports for specific services. This allows
"grading" of MGI card(s) for traffic conditions. The MGI ports can be segregated into
groups. Keep in mind that any entries made here can be ineffective, if conflicting
entries exist in MMC616.
• LOCAL ITP: This determines what MGI ports can be used with ITP keyphones
across a private IP network
• PUB IP ITP: This determines what MGI ports can be used with ITP keyphones
on a public IP network.
• VOIP NTWK: This determines what MGI ports can be used for enhanced
proprietary Samsung VoIP networking between OfficeServ 7400, OfficeServ
7200, OfficeServ 500 and the OfficeServ 100 systems across a private IP
network.
• PUB IP NTWK: This determines what MGI ports can be used for enhanced
proprietary Samsung VoIP networking between OfficeServ 7400, OfficeServ
7200, OfficeServ 500 and OfficeServ 100 systems on a public IP network
• VOIP TRUNK: This determines what MGI ports can be used as industry-
standard H.323 VoIP trunks for communications across a private network
• PUB IP TRK: This determines what MGI ports can be used as industry-standard
H.323 VoIP trunks for communications on a public network
• PUB IP MGI3: This determines what MGI ports can be used for T.38 facsimile
communications on a public network.
• ITP PAGED: This determines which trunk members can be used for ITP internal
station page.
The MGI ports can be regarded as trunks and allow two selection modes:
Sequential or Distributed.
The members of each selection are the actual ports on the MGI card(s)
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006
MGI GROUP