Mmc: 845-Dual-Band Wli Parameters - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 845-DUAL-BAND
DESCRIPTION:
This program provides detail parameters for WLAN settings.
<WLAN Parameter>
No. Parameter
01 CODEC LIST
02 VERSION
03 MAX AP CH
04 WLAN
SWITCH
According to the AP type, CWBS is displayed if WBS24 is set to Combo, and BWBS
if set to Basic on the LCD display. The AP type can be set in [AP TYPE] of [MMC
849].
<SIP Parameter>
Normally, use the default without change.
No. Parameter
1 GEN NO RESP
2 INV NO RESP
3 REQ RETRY
4 PROVISIONAL
5 RE-TRANS T1
6 RE-TRANS T2
7 RE-TRANS T4
CODEC used in a VoIP call between WBS24 and WIP-5000M.
Currently, it is possible to set G.729A only
Indicates the WLAN module version
Maximum channel per AP
Enable or disable the use of WLAN switch
Waiting time before canceling the SIP Request.
Waiting time before canceling the SIP INVITE Request.
Waiting time before the final response to the SIP Request is received.
When receiving the Provision Response, User Agent should wait
during this time before Timeout expires.
When using Unreliable transmission protocol such as UDP,
retransmission is performed if there is no response after transmission.
RE-TRANS.T1 TIME is the Initial Retransmission Interval defined in
RFC2543.
Maximum Retransmission Interval defined in RFC 2543.
Available for multiple purposes in RFC 2543. This parameter is used
as time when User Agent Server(UAS) receives the ACK message
and waits in the Unreliable transmission protocol.
Home Page
PART 2 JUNE 2006
WLI PARAMETERS
Description
Description
Table of Contents
PROGRAMMING