Samsung OfficeServ 7400 Technical Manual page 360

OfficeServ 7400
TECHNICAL MANUAL
ALM ALM
NO. CODE
72 MNF12
73 MNF13
74 MNF14
75 MNF15
76 MNF 16
77 MNF 17
78 MNF 18
79 MNF 19
80 MNF 20
81 MNF 21
82 MNF 26
83 MNF 27
84 MNF 28
85 MNF 29
86 MNG 01
87 MNG 02
88 MNG 03
89 MNG 04
90 MNG 05
MMC: 852
ALARM
SIO Out
SIO In
TODC Error
TSW Over Alarm
PSU Alarm
PSU Alarm Rec
SLI Fault
SLI Recovery
PSU B Alarm
DSS Alarm
SIO RxQ Over
SIO RxQ Under
LAN Printer Err
LAN Printer Rec
Phone Disconnect
Phone Connect
OFF Hook Alarm
On Hook
MGI Packet Loss
Home Page
PROGRAMMING
PART 2 JUNE 2006
DEFINITION
IO port has lost DTR
Alarm Data = SIO 1 through 6
IO port has regained DTR.
Alarm Data = SIO 1 through 6
Time of Day Clock in the MCP has
erred.
TSW has been requested to exceed the
capacity of available time slots.
Maximum 192 per cabinet.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
Indicates there are over 96 ports in a
cabinet with a single DPCU and more
power is required. ( DLI,SLI ports)
Alarm Data = Cabinet (1,2)
A second DPCU has been recognized
when added after alarm condition of
Alarm Data = Cabinet (1,2)
An SLI card has been detected as out of
service via an internal CODEC test.
Alarm Data = Cabinet, Slot Port (C1,2)
(S1 through 10)
(P1 through 24)
An SLI card detected as out of service
has been detected as recovered and is
in service via internal CODEC test.
Alarm Data = Cabinet, Slot Port (C1,2)
(S1 through 10)
(P1 through24)
A second PSUB is required
The number of DSS units has been
exceeded
The SIO receive buffer is over 80% full
The SIO receive buffer is back under
80% full
A LAN printer has lost communication
A LAN printer has recovered
communication
Table of Contents