Mmc: 305 Assign Forced Code - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 305
DESCRIPTION:
This MMC allows only one of the four options to be selected; the assignment of
account code with verification, account code without verification, authorization
codes, or none on a per-station basis or on an all-station basis. The system
supports 500 authorization codes and 999 account codes that are verified when
account codes verified is selected. If account codes without verification are selected,
then there will be no table used.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
FEATURE KEYS
0 NONE
1 AUTHORIZE
2 ACCT VERIFIED
3 ACCT NO VERIFIED
ACTION
1. Press TRANSFER 305
Display shows
2. Dial station number ( e.g., 205)
OR
Press UP or DOWN key to select station and
press RIGHT soft key to move cursor.
ASSIGN FORCED CODE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
No Account or Authorization code required (NOT forced
strictly voluntary).
Forces user to enter a valid four digit Authorization code
listed in AUTHORIZATION CODE. Table (MMC 707).
Forces user to enter a valid account code listed in
ACCOUNT CODE Table (MMC 708).
Forces user to enter an account code but this code is
NOT verified. User can make up any code (any account
code up to 12 digits including ∗ and #).
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
[201] FORCD CODE
NONE
[205] FORCD CODE
NONE
Table of Contents