Mmc: 119 Caller Id/Ani Display - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 119
DESCRIPTION:
Allows the technician to set the individual station display preference on a per station
basis. Caller ID, ANI and ISDN CLI can be selected to either show the name,
number first, or no display depending on the type of call. Caller ID, ANI and ISDN
CLI displays have the following options:
0. NO DISPLAY
1. NUMBER FIRST
2. NAME FIRST
PROGRAM KEYS
UP & DOWN
KEYPAD
SPEAKER
ANS/RLS
ACTION
1. Press TRANSFER 119
Display shows first station
2. Enter station number (e.g., 205)
OR
Press UP or DOWN to scroll through
stations and press the RIGHT soft key
to select a station
OR
Press ANS/RLS to select ALL and press the
RIGHT soft key.
CALLER ID / ANI DISPLAY
No Caller ID, ANI or CLI data will be displayed.
The Caller ID, ANI or CLI number received from the Central
Office will be displayed first.
The Caller ID name received will be displayed first. In the
case of ANI or CLI the number must be programmed in the
CID/ANI translation table (MMC 728). ANI does not provide
names.
Used to scroll through options
Used to enter selections
Used to store data and advance to next MMC
Used to select ALL
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
[201] CID DISP
NUMBER FIRST
[205] CID DISP
NUMBER FIRST
Table of Contents