Mmc: 614 Set A Station/C.o. Line Call Group - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 614
DESCRIPTION:
This program is used to define on build "USE" groups to restrict calling. You can
assign stations to a specific STATION USE GROUP and trunks to a specific TRUNK
USE GROUP.
Definable USE GROUPS:
STATION USE GROUPS = 001 to 300
TRUNK USE GROUPS = 301 to 500
Example of how to use: Initially all stations can call all other stations because they
are all in Station Use Group 001. Put stations 225 to 250 in Station Use Group 002
then go to MMC 314 and restrict 001 from using or calling 002.
Now put trunks 711 to 720 in Trunk Use Group 302 then go to MMC 304 and set
ANS:NO and DIAL:NO for Station Use Group 001.
You have now restricted station 201-224 (001) from using trunks 711-720 (301).
Stations 201-224 (001) can not call station 225-250 (002).
Note: Station Use Groups and Trunk Use Groups must be in the same Tenant
Group, either 1 or 2.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear entry
TRANSFER To exit programming
ACTION
1. Press TRANSFER 614.
Display shows first station.
SET A STATION/C.O. LINE CALL GROUP
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
STATION GROUP
2001:001
Table of Contents