Samsung OfficeServ 7400 Technical Manual page 195

OfficeServ 7400
TECHNICAL MANUAL
DISPLAY DELAY TIMER This timer controls the duration a display is shown in the
DOOR LOCK RELEASE This timer controls the duration of time the door lock relay
DOOR RING DETECT
DOOR RING OFF TM
E-HOLD RECALL TM
FIRST DIGIT TIME
HOK FLASH MAX TM
HOK FLASH MIN TM
HOOK OFF TIME
HOOK ON TIME
INQUIRY RELEASE
INTER DIGIT TIME
ISDN INTERDIGIT TIMER
MMC: 501
LCD display. This timer also controls the duration of time
that error tone is heard.
will be activated.
This timer controls the duration of time before a call is
answered by the door phone.
This timer controls the duration of ringing at the door ring
destination before automatically canceling.
This timer controls the duration of time a call is held
exclusively at a station before recalling.
This timer controls how long the system will wait for
dialing to begin before dropping the dial tone and
returning the user to error tone.
This timer monitors the duration of a hookswitch flash to
ensure that the flash is valid and not a line noise or an
accidental hookswitch bounce (LONGEST DURATION).
This timer monitors the duration of a hookswitch flash to
ensure that the flash is valid and not a line noise or an
accidental hookswitch bounce (SHORTEST DURATION).
This timer controls the time before dial tone is sent to a
single line station.
This timer sets the minimum amount of time that the
system will recognize as an SLT hang up.
This timer monitors the duration of the interaction of the
soft key to determine when to return the LCD back to a
normal status. This timer affects only display phones.
This timer controls the grace period between dialing
valid digits before dropping the call and returning the
user back to error tone.
This timer controls the grace period between dialing
valid digits and the end of the dialing string on an ISDN
call.
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006