Mmc: 605 Assign External Page Zone - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 605
DESCRIPTION:
Determines which relays will close when one of the four external page zones is
accessed.
NOTE: The system must be equipped with a MIS daughter-board to allow external
paging. Even though there are 4 external paging zones available (zone 5 ~ 8) only
two can be used at one time.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION
1. Press TRANSFER 605.
Display shows first page zone.
2. Dial page zone number (e.g., 6)
OR
Use UP or DOWN to select desired page
zone numbers and press RIGHT soft key to
move the cursor.
3. Dial member number (e.g., 3)
OR
Use UP or DOWN to select member
numbers and press RIGHT soft key to move
the cursor
OR
Press LEFT soft key to return to step 2
above.
4. Dial relay number via dial keypad (e.g.,
3602)
ASSIGN EXTERNAL PAGE ZONE
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
EXT. PAGE ZONE:(5)
MEMBER 1:3601
EXT. PAGE ZONE:(6)
MEMBER 1:NONE
EXT. PAGE ZONE:(6)
MEMBER 3:
EXT. PAGE ZONE:(6)
MEMBER 3:3602
Table of Contents