Samsung OfficeServ 7400 Technical Manual page 206

OfficeServ 7400
TECHNICAL MANUAL
2. Dial tone number from above list (0–9, e.g., 9)
OR
Press UP or DOWN key to select tone, press
LEFT soft key and advance to step 3.
3. Dial tone option 0 for CONTINUOUS or
1 for INTERRUPT
OR
Press UP or DOWN key to select tone
control and press RIGHT soft key to advance
to step 4
OR
Press LEFT soft key to return to step 2.
4. Dial new value for interrupt times (must be
four digits).
Press RIGHT soft key advances cursor.
Press LEFT soft key retreats cursor.
If valid entry, system returns to step 2.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: SEE BELOW FOR CADENCES. BY DEFAULT DIAL TONE AND
MESSAGE WAIT TONE ARE CONTINUOUS.
TONE
0 BUSY TONE
1 CONFIRM/BARGE-IN TONE
2 DIAL TONE
3 DND/NO MORE TONE
4 ERROR TONE
5 HOLD/CAMP-ON TONE
6 MESSAGE WAIT TONE
7 RING BACK TONE
8 RING TONE
9 TRANSFER TONE
10 DID RINGBACK TONE
NOTE: All times are in milliseconds.
RELATED ITEMS: NONE
MMC: 506
TRSFER TONE
INTERRUPT TONE
TRSFER TONE
INTERRUPT TONE
TRSFER TONE:0100
9900 0100 9900
ON OFF ON
500 500 500
50 50 50
1000 250 1000
250 250 250
250 250 250
500 3500 500
1000 250 1000
1000 3000 1000
1000 3000 1000
100 100 100
2000 4000 2000
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006
OFF TONE
500 Interrupt
50 Interrupt
250 Continuous
250 Interrupt
250 Interrupt
3500 Interrupt
250 Continuous
3000 Interrupt
3000 Interrupt
100 Interrupt
4000 Interrupt