OfficeServ 7400
TECHNICAL MANUAL
4. Press RIGHT soft key to move cursor to
number of member and enter valid member
number (1-99, e.g., 05) via dial keypad
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor.
5. Enter valid trunk number (e.g., 729)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2.
6. Repeat steps 1-5 to remove trunk from group
9 if necessary.
7. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
DEFAULT DATA:
ALL TRUNKS ARE IN TRUNK GROUP 9
RELATED ITEMS: LCR PROGRAMMING
MMC: 603
[801]
MEMBER 05:NONE
[801]
MEMBER 01:729
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006
TRK GROUP
TRK GROUP