Mmc: 500 System-Wide Counters - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 500
DESCRIPTION:
Used to set the values of the system counters. The counters are listed below with a
brief description of each.
0 ALARM REM. CNTER
1 AUTO RDL COUNTER
2 DISA CALL CNTER
3 DISA LOCK CNTER
4 NEW CALL COUNTER
5 UCDS VISUAL ALARM
6 UCDS AUDIO ALARM
7 UCD CS LEVEL 1
SYSTEM-WIDE COUNTERS
The number of times that an alarm reminder will ring
a station before cancelling. RANGE = 1-99. (Also
used for wake up calls).
The number of times the system will redial an outside
number after the auto redial feature has been
activated. RANGE = 1-99.
Sets the maximum number of intercom calls that can
be made after accessing a DISA line. RANGE = 1-99.
Number of attempts the system will allow to
incorrectly access a DISA line before locking out the
DISA line. RANGE =1-99
Number of times the system will allow a user to signal
New Call on a
RANGE = 1-99.
Used to set the Visual alarm threshold. It is triggered
when the number of calls waiting to be answered in
the UCD group reaches this value. The SP key will
flash when this number of calls is queued to the UCD
group. RANGE = 0-25.
Used to set the Audio alarm threshold. It is triggered
when the number of calls waiting to be answered in
the UCD group reaches this value. The SP key will
flash and the phone will ring when this number of
calls is queued to the UCD group. RANGE = 0-25.
Provides call wait indication level 1 if number of calls
waiting to be answered in UCD group reaches this
value. CS keys will flash amber when this number of
calls is queued to the UCD group. RANGE = 0-25.
Home Page
PROGRAMMING
PART 2 JUNE 2006
C.O. line during
Table of Contents
one call.