Mgi Group Numbering Plan - Samsung Officeserv 7100 Technical Manual

Table of Contents
Home Page
OfficeServ 7100 SPECIAL APPLICATIONS
TECHNICAL MANUAL PART 2 JANUARY 2009

MGI Group Numbering Plan

When using MMC 615: MGI Group, an understanding of the multi-use aspect of the
MGI should be understood. There is a correlation between the Numbering Plan and
Trunk Group Members. To provide a perspective of the port assignment on the MGI
card(s) Table 1 should be used as an example to understand default assignments. For
brevity the first 8 port assignments are shown in the example.
MMC 615: MGI Group Assignments, selects which MGI ports will be accessed based
on the call type. Default assignments allow all ports to connect to all services.
Local ITP: This refers to ITP keyphone stations on a private network.
Public IP ITP: This selects ports to be used by ITP keyphone by the public or exposed
side of the network.
VoIP Network: This refers to ports used when using the iDCS Networking features on a
private network. These ports will transport the voice side of an OfficeServ 7400 Release
2 system networking call.
Public IP Network: This selects ports that will be used when using the iDCS
Networking features via a public or exposed IP networking. These ports will transport
the voice side of an OfficeServ 7400 Release 2 system networking call.
VoIP Trunk: This refers to the MGI ports that will be used for VoIP trunking gateway
calls on a private network.
Public VoIP Trunk: This refers to the MGI ports that will be used for VoIP trunking
gateway calls via a public or exposed network.
2.6.12