Samsung OfficeServ 7400 Technical Manual page 201

OfficeServ 7400
TECHNICAL MANUAL
MFR DLY TIME This is a delay time before a receiver will listen for DTMF for
incoming call. This timer should not be changed from its default
value of 0 seconds.
DISA ANSR This is a delay time to answer the DISA trunk call or to answer the
trunk when TRK AUTO ANSWER is set to ON (MMC 400).
CONN DELAY This is a delay time to connect voice path when the users make
outgoing call via loop trunk. This is to prevent the user from
hearing noise when loop trunk is seizured.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 503.
Display shows.
2. Dial trunk number (e.g., 704)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks and
press RIGHT soft key to move cursor.
3. Dial timer number from the list
OR
Press UP or DOWN key to select timer and
press RIGHT soft key to move cursor.
4. Enter new timer value (must be four digits,
e.g., 0700).
System returns to step 2.
MMC: 503
DISPLAY
[701] ANS.BAK TM
0600 MS ®
[704] ANS.BAK TM
0600 MS ®
[ALL] ANS.BAK TM
0600 MS ®
[704] DTMF DUR.
0600 MS ®_
[704] DTMF DUR.
0600 MS ®0700
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006