Mmc: 616 Mgi User - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 616
DESCRIPTION:
This optional program selects which specific MGI ports will be dedicated on a per-
port basis for IP station/trunk devices. If this MMC is not utilized, allocation of MGI
ports will be controlled by MMC 615. By defining dedicated MGI port usage, the IP
station/trunk selected will always use the port programmed. MGI ports can be
assigned private and public ITP stations (32XX), VoIP Networking trunks (83XX),
H.323 trunks (84XX) and SIP trunks (85XX). Only one assignment per MGI port is
permitted. Any entries made here will override entries made in MMC 615.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Press TRANSFER 616.
Display shows the first available option.
Press UP or DOWN key to select an MGI port
OR Press the RIGHT soft key to move cursor.
2. Press UP or DOWN key to select an option
OR Press RIGHT soft key to move cursor
3. Press UP or DOWN key to select an option or
use the dial pad to input a station or IP trunk
number and press RIGHT soft key to enter
data and move cursor to the Step 1 position.
4. Press UP or DOWN key to select a different
MGI port OR press RIGHT soft key to move
cursor.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Home Page
PROGRAMMING
PART 2 JUNE 2006
MGI USER
DISPLAY
(3801) MGI USER
NONE
(3801) MGI USER
NONE
(3801) MGI USER
278
(3802) MGI USER
NONE
Table of Contents