Mmc: 845-Combo Wli Parameters - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 845-COMBO
DESCRIPTION:
(NOT SUPPORTED ON OS 7400)
<WLAN Parameter>
No. Parameter
00 SYSTEM ID
01 SYSTEM KEY
st
02 1 DNS IP
nd
03 2 DNS IP
nd
04 2 WBS IP
05 CODEC LIST
06 RF CHANNEL
07 VERSION
08 TFTP SERVR
09 TFTP FILE
18 WBS TX PWR
19 CLR
WBSREG
<WBS Parameter>
No. Parameter
0 IP ADDRESS
ID used to classify the system in the wireless environment. Different IDs
are used according to the system(Mandatory entry item)
Key used to register a terminal. Different values should be used
according to the system.
If you change the default, you can use a wireless terminal and supply
power to WBS24(Mandatory entry item)
st
IP address of the 1 Domain Name Server(DNS)
nd
IP address of the 2 of Domain Name Server(DNS)
All IP addresses of WBS24 used by the wireless terminal in the system.
Use the default if there is no IP collision with other devices connected to
the same subnet
CODEC used in a VoIP call between WBS24 and WIP-5000M.
Currently, it is possible to set G.729A only
Sets the RF channel value available in WBS24
Indicates the WLAN module version
Sets the server IP for WBS24 upgrade
Sets the file name for WBS24 upgrade
Changes TX power of the entire WBS24. Level 1 is minimum, level 4 is
maximum.
Initializes the entire entry information on WBS24
The IP address for connecting the Ethernet for WBS24
(Mandatory entry item)
Home Page
PART 2 JUNE 2006
WLI PARAMETERS
Description
Description
Table of Contents
PROGRAMMING