Samsung OfficeServ 7400 Technical Manual page 175

OfficeServ 7400
TECHNICAL MANUAL
7. Separator 3
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
A
B
C
ACTION
1. Press TRANSFER 420.
Display shows.
2. Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
3. Enter trunk group number via dial keypad
Press RIGHT soft key to ENTER and proceed
to the next step.
4. Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
5. Enter data via dial keypad or press HOLD for
NONE.
Press RIGHT soft key to ENTER and proceed
to next step.
6. Press UP or DOWN key to make selection.
7. Press RIGHT soft key to move cursor.
8. Press UP or DOWN key for selection.
Press RIGHT soft key to enter and
move cursor.
MMC: 420
This separator indicates the close of digits being sent
on an ANI / DNIS call. Valid inputs include 0 to 9, *,
#, CC or NONE.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used in some fields where a value is entered or deleted
Used to input alpha character "A"
Used to insert alpha character "B"
Used to insert alpha character "C"
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
ANI DNIS SET UP
TRK GROUP:
ANI DNIS SET UP
TRK GROUP:_
ANI DNIS SET UP
TRK GROUP:80
ANI DNIS SET UP
SEPARATOR 1:NONE
ANI DNIS SET UP
SEPARATOR 1:NONE
ANI DNIS SET UP
DN 1: ANI NND:
ANI DNIS SET UP
DN 1: ANI NND:
ANI DNIS SET UP
DN 1: ANI NND:
Table of Contents