Samsung OfficeServ 7400 Technical Manual page 358

OfficeServ 7400
TECHNICAL MANUAL
ALM ALM
NO. CODE
44 MJD13
45 MJD14
46 MJD15
47 MJD16
48 MJD17
49 MJD18
50 MJD19
51 MJD20
52 MJD21
53 MJD22
54 MJE01
55 MJE02
56 MJE03
57 MJE04
58 MJE05
59 MJE06
60 MJE07
MMC: 852
ALARM
LPBK Error
LPBK Recovery
BRI DL Unavail
BRI DL Recovered
RAM Error
T1 Restart
PRI Restart
BRI Restart
PCM Loss
PCM Recovery
MGI Restart
MGI Stop
MGI IP Duplicate
MGI Ntwk Error
MGI Ntwk Rec.
MGI DSP Error
MGI DSP Run
Home Page
PROGRAMMING
PART 2 JUNE 2006
DEFINITION
Internal on demand loopback failed.
Alarm Data = Cabinet, Slot Channel
(C1,2)
(S1 through 10), (C1 through 24)
Internal on demand loopback test
passed.
Alarm Data = Cabinet, Slot Channel
(C1,2)
(S1 through 10), (C1 through 24)
A BRI data link is out of service.
Alarm Data = Cabinet, Slot Channel
(C1,2)
(S1 through 10), (C1 through 16)
A BRI data link is back in service.
Alarm Data = Cabinet, Slot Channel
(C1,2)
(S1 through 10), (C1 through 16)
An error has occurred in the T1/PRI or
BRI card RAM.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
The T1 card has restarted
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
The PRI card has restarted
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
The BRI card has restarted
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
Recovery of PCM coding on a digital
facility.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
An MGI card has restarted.
An MGI card has stopped.
MGI IP address conflict.
MGI Recovery.
Table of Contents