Samsung OfficeServ 7400 Technical Manual page 311

OfficeServ 7400
TECHNICAL MANUAL
• MAX JITTER: Decides the maximum time to consider delay for jitter adjustment.
The range is 010-300ms.
• FAX ECM: This option selects retry of Fax-over-IP, in the case that errors are
detected (0: disable, 1: enable).
• MAX FAX CNT: This is maximum number of channels that can be
simultaneously utilized for Fax-over-IP. The range is 00~16.
• DTMF TYPE: There are two types of DTMF transmission: INBAND, which is
industry standard (H.245) type DTMF transport, and OUTBAND which is a
Samsung proprietary method.
• TOS FIELD: An eight-bit binary value that will be utilized by external routers,
switches, etc (that optionally support TOS-bit prioritization) – to identify the
transport-priority value of data packets generated by the MGI card. This value
can be left at default value (00000000) if your network infrastructure does not
support this method of bandwidth management.
• FAX RETRY: The number of attempts to resend a failed fax transmission.
• RTP CHECK TIME: Interval between RTCP packets sent from MGI cards.
Note: Does not apply to ITP to ITP calls (where both ITP's are in same public
zone, or both in same private zone). For ITP to ITP calls, use settings in MMC
840/MMC 841.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Press TRANSFER 835.
Display shows the first option. Press UP or
DOWN key to select MGI3 or MGI2
OR
2. Press RIGHT soft key to move cursor. Press
UP or DOWN key to select an parameter.
3. Press RIGHT soft key to enter data and move
cursor.
MMC: 835
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
AUDIO CODEC
G.729A
AUDIO CODEC
G.729A
AUDIO CODEC
G.729A
Table of Contents