Mmc: 300 Customer On/Off Per Station - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 300
DESCRIPTION:
Allows the following features to be enabled on a per-station basis.
ACCESS DIAL
MICROPHONE
OFF-HOOK RING
SMDR PRINT
TGR ADV.TONE
VMAA FORWARD
INTRCOM SMDR
FWD OVERRIDE
RECL TO OPER
SLT LP OPEN
CUSTOMER ON/OFF PER STATION
Determines whether a user can select a trunk or trunk group
by dialling its directory number (DN). This selection should
be turned to off when using LCR.
This option allows or denies the use of a keyset's
microphone if equipped.
Will allow a short burst of ring tone to indicate another call.
When the station is set for no C.O. calls to and from this
station, the station will not print on SMDR. This includes
transferred calls or calls picked up from hold or park.
When this feature is set to ON, a warning tone will be heard
each time LCR advances to the next route.
This feature selects whether C.O. calls can be forwarded to
voice mail.
ON = Permits forward to voice mail.
OFF = No forward to voice mail.
When the station is set to OFF, the station will not print
intercom calls on SMDR.
When set to OFF intercom calls from this station will not
follow the call forwarding of the called station.
This option determines if a transferred call will recall to the
transferring station (OFF) or to the operator (ON).
This option only applies to single line ports. When this
option is set to ON the SLT port will receive a Loop Open
Disconnect if the calling or called party hangs up before the
SLT. This option does not affect ports set as DATA or VMAA
in MMC 207/208, these ports will always receive a
disconnect regardless of this setting.
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006