Mmc: 723 System Key Programming - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 723
DESCRIPTION:
This MMC is much like MMC 722, Station Key Programming. The main difference is
that this MMC is system-wide rather than on a per-station basis. Features are
entered via the dial keypad by pressing numbers as shown in the table. For
example, for OHVA the number 6 is pressed three times. If the BOSS key is required,
press 2 for the first letter B, and then use the UP or DOWN key to change selection
from BARGE to BOSS.
COUNT→
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
TYPE OF SET
0 24-BTN
1 12-BTN
2 7-BTN
3 32-BTN AOMs
4 64-BTN AOMs
5 28 BTN
6 18 BTN
7 8 BTN
8 99 BTN
9 38 BTN – NOT AVAILABLE IN US
10 21 BTN
11 14 BTN – NOT AVAILABLE IN US
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SYSTEM KEY PROGRAMMING
DIAL KEYPAD
1 2
AAPLAY BARGE
DICT DICT
GPIK HDSET
LCR LCR
MMPA NEW
PAGE REJECT
TG UA
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006
3
CALL
FAUTO
I/G
LCR
OHVA
SETMG
VDIAL