Mmc: 705 Assign System Speed Dial - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 705
DESCRIPTION:
Enables the assignment of system speed dialling numbers. There are up to 500
entries available for programming
500 in MMC 861 or 950 available if SYSTEM SPEED DIAL MAX = 950 in MMC 861.
Each speed dial number consists of a trunk or trunk group access code followed by
a separator and up to 24 digits to be dialled. These dialled digits may consist of 0-9,
and #. If the system recognises a valid trunk or trunk group access number, it will
automatically insert the separator.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
B Used to insert a flash code "F"
C Used to insert a pause code "P"
D Used to insert a pulse/tone conversion code "C"
E Used to mask/unmask following digits - shows as "[" or "]"
F Used to enter name for speed dial bin (see MMC 706)
ACTION
1. Press TRANSFER 705.
Display shows.
2. Dial speed index desired (e.g., 505)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor.
3. Enter access code (e.g., 9/701) plus the
phone number up to 24 digits (digits will
scroll under) and press RIGHT soft key to
return to step 2.
4. Press F key to toggle to MMC 706 step 3 to
enter name.
ASSIGN SYSTEM SPEED DIAL
(see MMC 606) if SYSTEM SPEED DIAL MAX =
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
SYS SPEED DIAL
500:
SYS SPEED DIAL
505:
SYS SPEED DIAL
505:9–121223456789
SYS SPEED NAME
505:
Table of Contents